On the 7th of October 2012, I was lucky enough to visit the Folkestone, Hythe & District Model Railway Club 2012 exhibition.
It was the second time I'd visited the exhibition in as many years, and the weather was, once again, superb. There's something about a Sunday morning on the cliffs of Folkestone - the crisp air, gentle breeze, and sunshine just seem to come together to set the mood for the day.
I was, predictably, early, so took a gentle stroll along the cliff top path. There's an interesting funicular railway (the Leas Cliff Railway) that dates from 1885 which is worth a look, and often a car boot sale in the car park beneath the cliff.
Eventually it was time to meander back to the Leas Cliff Hall, buy tickets, and stand in line for entry to the show.
Flicking through the programme (I tend to buy one as a kind of souvenir), it became obvious that the day would be special - at least for me - as there were several layouts that I'd seen in magazines, but never in the flesh, so to speak.
One of these is the military themed Rowland's Castle, which I've always wanted to see running, and was surprised at the amount of detail that's left out of magazine articles on it. If you're lucky enough to see Rowland's Castle, look out for the Standstead Forest infantry camp.
The attention to detail is stunning.
The Folkestone MRC show itself is liberally spread on two floors, plus balconies and corridors, full of things to see, operate, and buy. All the stalls from last year were much as I remembered, all well stocked and relevant, but once again I was surprised that only a few of them seemed willing to accept card payment.
Hornby was there, again, extolling the virtues of their DCC system. I'll freely admit that last year I gave them the cold shoulder, after having a few bad experiences with low quality DCC gear from them in the past.
This year, I decided to have a second look at what they have to offer, as I'm evaluating computer control options for my two layouts. For those who don't know, the options are to stay with Piko, and use an IR transmitter to control the layouts.
This isn't ideal, and the feedback options are limited, so the next option is a Sprog 3 plus Heathcote Electronics interfaces, but it's still a bit of a chewing-gum and sticky-tape solution. Flexible, but tricky.
From what I saw, the Hornby Railmaster software, plus the Elite Controller (and a laptop) is the way forward, and something that I'll be investigating whilst I put together my Christmas list!
So, at the Folkestone MRC show, I saw layouts that I'd previously only seen in magazines, found a few answers to some pertinent questions relating to DCC, and saw how layouts get operated once they're built.
It's a full day for a model rail enthusiast, and perhaps half a day for those with only a casual interest, not including shopping time!
More information about next year's exhibition, which I also hope to be attending, can be found on the Folkestone MRC web site.
Model railway layouts, tips and tricks for Hornby, Bachmann, OO Gauge and N Gauge, UK model rail exhibition notes and reviews, and model rail news.
Tuesday, 16 October 2012
Friday, 12 October 2012
How to Add Sound to a Model Rail Layout
A little bit of sound on a layout can add an extra dimension to the experience, albeit at a cost.
DCC Sound
The sound is provided by a speaker, connected to a special DCC decoder that can store sound files to be played back through the speaker.
The decoder can store several sounds, depending on what the locomotive is supposed to be doing:
The decoder and speaker are then mounted in the locomotive.
DCC Sound on Locos
This can be a delicate operation : as with fitting any decoder, it requires taking the locomotive apart, and fitting both the decoder and the speaker.
Larger diesels will have space between the bogies, steam locomotives ought to have space in the tender, or in the body itself.
Smaller locomotives, such as the Class 08 diesel or 0-4-0 steam engines will be fiddly, and where possible, pre-fitted DCC sound models should be bought in preference to trying to retro fit the sound kit.
DCC Sound on the Layout
There is, however, another way, and that is to use one decoder for all the locos, mounted on the baseboard.
This has some obvious advantages, such as sound quality, and some clear disadvantages, such as the sound not following the locomotive around the layout.
Of course, a big advantage is that the decoder and speaker do not need to be mounted in the loco, although they do still need to be DCC. This is because the decoder needs to decode the control signals, decide which loco it is destined for, and play the appropriate sound file.
So, in a nutshell, that's how DCC sound works. It's a complex topic, covered in some depth in the book DCC Projects & Applications: Digital Command Control for Your Model Railroad (Model Railroader)
. It covers all aspects of DCC, and provides information that can be applied immediately to those who want to add DCC to their layout, or extend an existing layout.
DCC Sound
The sound is provided by a speaker, connected to a special DCC decoder that can store sound files to be played back through the speaker.
The decoder can store several sounds, depending on what the locomotive is supposed to be doing:
- idling;
- starting;
- running;
- braking;
- etc.
The decoder and speaker are then mounted in the locomotive.
DCC Sound on Locos
This can be a delicate operation : as with fitting any decoder, it requires taking the locomotive apart, and fitting both the decoder and the speaker.
Larger diesels will have space between the bogies, steam locomotives ought to have space in the tender, or in the body itself.
Smaller locomotives, such as the Class 08 diesel or 0-4-0 steam engines will be fiddly, and where possible, pre-fitted DCC sound models should be bought in preference to trying to retro fit the sound kit.
DCC Sound on the Layout
There is, however, another way, and that is to use one decoder for all the locos, mounted on the baseboard.
This has some obvious advantages, such as sound quality, and some clear disadvantages, such as the sound not following the locomotive around the layout.
Of course, a big advantage is that the decoder and speaker do not need to be mounted in the loco, although they do still need to be DCC. This is because the decoder needs to decode the control signals, decide which loco it is destined for, and play the appropriate sound file.
So, in a nutshell, that's how DCC sound works. It's a complex topic, covered in some depth in the book DCC Projects & Applications: Digital Command Control for Your Model Railroad (Model Railroader)
Getting Started in Model Rail : High Street Brands
Everyone has to start somewhere in the model rail hobby, and one of the best ways is to buy some ready to run, off the shelf kit from one of the main high street brands.
There are many, many manufacturers of model rail equipment, locomotives and rolling stock, and they range from fairly specialist makes to two or three brands generally available on any high street, or via the web.
So, gauge by gauge, here is a guide to some of the most popular readily available brands for those just getting started with model rail.
OO - Hornby Railroad
Hornby International is one of the oldest established brands, with sub brands including Hornby, Hornby Railroad, and Lima.
Railroad is a hobby oriented brand, offering slightly cheaper, less detailed and lower specification locomotives and rolling stock.
Since the acquisition of Scalextric, some of the Railroad locomotives allegedly come with a Scalextric motor, leading them to be less smooth to operate, and with unrealistic acceleration and top speeds.
Despite this, it's a good starting point for a model rail enthusiast; but be aware that the couplers are not generally compatible with other brands such as Bachmann and more expensive Hornby models.
Railroad boxes are easy to spot, as they have yellow flashing on the bottom, below the window.
OO - Hornby
Within the Hornby range, there are also various levels of finishing and price. While any model from this range will be of good quality, some are better value than others.
Where Hornby does stand out is with the excellent selection of starter packs, which are available from many toy shops. Often these are laid out next to makes like Mehano, and Lima, which can make Hornby (and Bachmann) seem a bit expensive, but the additional investment is well worth it.
OO/HO - Bachmann
Like Hornby, Bachmann has a number of sub-brands in the group, some of which produce European outline stock in HO, US also in HO, and British outline in OO.
Personally, from the various models I have purchased, Bachmann locomotives seem to be better finished, and smoother than the Hornby equivalents, but that some of the Hornby rolling stock (brake vans, for example) offer better value.
Bachmann rolling stock also all comes with standard NEM pockets, making it easy to extend the collection with more rolling stock. It is organized by era to make it easier to cross-match rolling stock without needing to overload on research!
HO - Piko
For European outline stock, Piko is probably the most accessible, and is available in Expert and Hobby, mainly French and German stock, organized by era and region. This makes it easy to match up stock and keep a consistent rake together.
Piko also make good value packs of both freight and passenger trains, complete with track, controllers, and layout ideas.
Piko Hobby boxes can be spotted by the red flashing with Hobby written on them. Piko Expert boxes have blue flashing with Expert written on.
N - Graham Farish
While the smaller gauges (N and Z) are less popular, they require less space, and are gaining in popularity.
Graham Farish, a Bachmann sub brand, provide excellent quality models, at very reasonable prices.
Z - Marklin
Marklin is a bit of an odd-ball, having chosen to implement a 3 rail power system for its locomotives, rendering it incompatible with all the others mentioned here.
For all that, in Z gauge, it does have some interesting starter packs, and is a very space-conscious way to get into model rail as a hobby.
Finally, a few notes about track. Peco is perhaps the largest manufacturer of track, but Hornby also manufactures its own. Generally, it is not possible to mix track between manufacturers, so if a Hornby pack is bought, future expansions will also need Hornby track.
However, HO and OO will both run on the same set-track (i.e. pre-cut, slot together pieces) regardless of manufacturer.
Power is supplied to the track via a special adapter, as either DC or AC. 16v AC is used for so-called DCC (digital command control) trains, while DC is used for analogue sets.
If in doubt - start with a DC (i.e. analogue) solution, as DCC can always be added at a later date. It's far harder to start with DCC as it comes with a whole slew of options, settings, and possibilities that baffle even experienced model rail enthusiasts!
So, gauge by gauge, here is a guide to some of the most popular readily available brands for those just getting started with model rail.
OO - Hornby Railroad
Hornby International is one of the oldest established brands, with sub brands including Hornby, Hornby Railroad, and Lima.
Railroad is a hobby oriented brand, offering slightly cheaper, less detailed and lower specification locomotives and rolling stock.
Since the acquisition of Scalextric, some of the Railroad locomotives allegedly come with a Scalextric motor, leading them to be less smooth to operate, and with unrealistic acceleration and top speeds.
Despite this, it's a good starting point for a model rail enthusiast; but be aware that the couplers are not generally compatible with other brands such as Bachmann and more expensive Hornby models.
Railroad boxes are easy to spot, as they have yellow flashing on the bottom, below the window.
OO - Hornby
Within the Hornby range, there are also various levels of finishing and price. While any model from this range will be of good quality, some are better value than others.
Where Hornby does stand out is with the excellent selection of starter packs, which are available from many toy shops. Often these are laid out next to makes like Mehano, and Lima, which can make Hornby (and Bachmann) seem a bit expensive, but the additional investment is well worth it.
OO/HO - Bachmann
Like Hornby, Bachmann has a number of sub-brands in the group, some of which produce European outline stock in HO, US also in HO, and British outline in OO.
Personally, from the various models I have purchased, Bachmann locomotives seem to be better finished, and smoother than the Hornby equivalents, but that some of the Hornby rolling stock (brake vans, for example) offer better value.
Bachmann rolling stock also all comes with standard NEM pockets, making it easy to extend the collection with more rolling stock. It is organized by era to make it easier to cross-match rolling stock without needing to overload on research!
HO - Piko
For European outline stock, Piko is probably the most accessible, and is available in Expert and Hobby, mainly French and German stock, organized by era and region. This makes it easy to match up stock and keep a consistent rake together.
Piko also make good value packs of both freight and passenger trains, complete with track, controllers, and layout ideas.
Piko Hobby boxes can be spotted by the red flashing with Hobby written on them. Piko Expert boxes have blue flashing with Expert written on.
N - Graham Farish
While the smaller gauges (N and Z) are less popular, they require less space, and are gaining in popularity.
Graham Farish, a Bachmann sub brand, provide excellent quality models, at very reasonable prices.
Z - Marklin
Marklin is a bit of an odd-ball, having chosen to implement a 3 rail power system for its locomotives, rendering it incompatible with all the others mentioned here.
For all that, in Z gauge, it does have some interesting starter packs, and is a very space-conscious way to get into model rail as a hobby.
Finally, a few notes about track. Peco is perhaps the largest manufacturer of track, but Hornby also manufactures its own. Generally, it is not possible to mix track between manufacturers, so if a Hornby pack is bought, future expansions will also need Hornby track.
However, HO and OO will both run on the same set-track (i.e. pre-cut, slot together pieces) regardless of manufacturer.
Power is supplied to the track via a special adapter, as either DC or AC. 16v AC is used for so-called DCC (digital command control) trains, while DC is used for analogue sets.
If in doubt - start with a DC (i.e. analogue) solution, as DCC can always be added at a later date. It's far harder to start with DCC as it comes with a whole slew of options, settings, and possibilities that baffle even experienced model rail enthusiasts!
Labels:
getting started,
hornby,
hornby railroad,
model rail,
piko
Tuesday, 31 July 2012
Quick Question - What are "NEM" Pockets on Model Railway Stock?
NEM stands for Normal European Modelling, and the NEM Standards were developed to allow for greater standardisation and interoperability in the hobby. NEM couplings must conform to the NEM 360 standard (available in French, here) and specify the height, size, and functioning of the coupling.
The NEM Pocket standard is NEM 362 (again, in French, here) and defines the stadard for interchangeable NEM couplings. The standards are closely monitored by the US NMRA, which means that manufacturers such as Kadee can provide the market with advanced automatic (un)couplers that are NEM compliant.
NEM pockets ensure that all railway stock is compatible. Hornby (except Railroad), Bachmann, and most others adhere to these standards for HO and OO rolling stock and locomotives. There are similar standards for other scales and gauges.
The list of most common standards is as follows:
- NEM 351 - Coupling standards, terms, and general introduction;
- NEM 355 - N gauge coupling pockets standard;
- NEM 358 - TT gauge (TT scale) coupling pockets standard;
- NEM 360 - HO coupling standard;
- NEM 362 - HO coupling pockets standard;
- NEM 363 - HO replacement coupling pockets standard;
- NEM 365 - standard for O gauge coupling.
The organisation in charge of the information (MOROP) is always looking for volunteers to help translate these documents into English.
Labels:
nem couplings,
nem pocket couplers,
nem pockets,
nem standards
How to Set Train Address with Piko Digi Fern
The Piko Digi Fern is the name given to the remote control device that comes with the Piko Digital starter set (for example Piko 57156
). Out of the box you usually get some rails, a DCC locomotive (set to C, or 003, more on that later) some rolling stock, the Digi Fern remote, and an IR receiver.
The first step is setup - and it's important when setting train addresses with the Piko Digi Fern that everything is set up correctly. There are two ways to set the address:
Special note for those programming on the main layout line - please disconnect all accessories (such as DCC Cobalt switch engines or similar) and LED lights before continuing. I have lost a few LEDs due to this oversight, as well as reprogrammed a couple of accessories!
(My service track is just a bit of G231 (Piko H0 55201 H0
) and a bit of G239 (Piko H0 55200 H0 Straight track G239
) nailed to a board, with a couple of banana connectors to hook up the IR receiver!)
Setting the Train Address with the Piko Digi Fern
The special key to start programming is usually the third from the left on the top row, next to the red "stop" button.It looks like a double-branch or double point. There's a similar single point one next to it, used to activate DCC accessories like points and switches.
I'll call this key [P] for now. The key sequence is:
During the process of setting the address, the loco will move, in twitches, so it's best to start with it as far back on the service track as possible.
Once programming has finished (and the light on the IR receiver has stopped flashing), the train can be selected using the train button, followed by the loco address. When the system is switched on, the A - D keys are allocated to loco addresses 1 - 4, so it is easiest to stick with these numbers, as just the 'channel select' button A to D can be used to pick up control of a loco.
The official Piko Digital User Guide has now been translated into English, and can be downloaded from the Piko Web Site.
Any questions or comments can be left below in the comments section. Links are affiliate links that go to Amazon.co.uk, for which the author receives a modest commission for any products bought.
The first step is setup - and it's important when setting train addresses with the Piko Digi Fern that everything is set up correctly. There are two ways to set the address:
- on the main layout;
- on a service track.
Special note for those programming on the main layout line - please disconnect all accessories (such as DCC Cobalt switch engines or similar) and LED lights before continuing. I have lost a few LEDs due to this oversight, as well as reprogrammed a couple of accessories!
(My service track is just a bit of G231 (Piko H0 55201 H0
Setting the Train Address with the Piko Digi Fern
The special key to start programming is usually the third from the left on the top row, next to the red "stop" button.It looks like a double-branch or double point. There's a similar single point one next to it, used to activate DCC accessories like points and switches.
I'll call this key [P] for now. The key sequence is:
- [P][P][train address]
[P]
During the process of setting the address, the loco will move, in twitches, so it's best to start with it as far back on the service track as possible.
Once programming has finished (and the light on the IR receiver has stopped flashing), the train can be selected using the train button, followed by the loco address. When the system is switched on, the A - D keys are allocated to loco addresses 1 - 4, so it is easiest to stick with these numbers, as just the 'channel select' button A to D can be used to pick up control of a loco.
The official Piko Digital User Guide has now been translated into English, and can be downloaded from the Piko Web Site.
Any questions or comments can be left below in the comments section. Links are affiliate links that go to Amazon.co.uk, for which the author receives a modest commission for any products bought.
Labels:
digi,
fern,
piko,
piko digi fern,
piko help,
programming train,
set address,
set train address,
train address
Subscribe to:
Posts (Atom)