Friday, 16 September 2011

Adding Symoba NEM Pockets & Kadee Couplings to Hornby Railroad Class 06

Following on from my experiment to convert the Hornby Railroad Class 06 to DCC, I'd been happily running it around an oval layout at a highly non-prototypical (or is that protoatypical?) speed when I realised that to actually do shunting with my Bachmann and Piko wagons in any kind of meaningful way, it would need further modification.

Since reading Model Rail's NEM coupler test report, I've gone a bit Kadee mad, fitting them to almost everything in sight. Okay, due to limited funds, I do generally just fit them to one example of each wagon, but that's an easy process, and easy to reverse.

Which brings me to the Railroad Class 06, which, unlike my more expensive HO Piko loco, doesn't have NEM pockets. For the uninitiated, NEM pockets are little boxes that hold the coupling, and which make it easy to interchange couplings as you wish.

The Class 06, however, has a Lima style D ring. Luckily, it's in plastic.


Clearly, if I was going to Kadee-ify the Class 06, I'd first have to get rid of the Lima D rings (oh, yes, front and back) and replace them with something capable of taking the Kadees.


(For those wondering, I use Kadee rather than the clever Brian Kirby 'BK' magnetic uncoupling solution on my inglenook-inspired shunting layout because I take advantage of the delayed uncoupling feature. More on that another time.)


It turns out that Symoba made the exact pieces that I needed : a NEM pocket and adapter to hold it. The NEM socket was cheap. The adapter, because of the little springs inside it to handle cornering, and the engineering of the whole thing was not quite so cheap!


At this point, a photo would be useful, but again, I didn't take any, so you'll have to take a look at the official Symoba web site. When I do another hatchet-job on a Railroad, I'll post up the photos. Promise.


Back to the conversion. Take a knife, and remove the D-rings. Prise out the little bobbing arm thingy, and take a deep breath.


At this point, I thought it would be an easy enough job : just cut enough of the chassis away to accommodate the mounting plate for the adapter, and glue it in place, plastic to plastic.


Wrong!


In fact, you have to cut the chassis right back to the metal underside, otherwise you can't get the NEM pocket high enough up the sprung mounting pole to meet the height of the other couplings on the rolling stock. 

I tried every which way, swore, sweated, and then un-glued the mounting plate to give it another go. Cutting back to the metal does the job, on the Class 06, but I can't vouch for other locos. Either way, the sprung pole is long enough that it doesn't really matter how far into the chassis area the adapter is mounted.


And that's it. I got a piece of rail, put a NEM/Kadee-ified wagon on it, and used that to measure the height of the pocket, which slides onto the mounting pole. That's a tight fit, so be sure to only push it up the pole gradually, as going the other way might just tear the mounting plate away from the chassis of the loco.

Now, the running tally of the cost of the Class 06 is as follows:
  • Loco : £20
  • DCC chip : £11
  • NEM pockets : £1
  • NEM adapters : £6
  • Total : £38

The closest thing to that would be Bachmann's admittedly excellent Class 03 (or Class 08's) which are around £50-54, and would need a DCC chip fitting, for a total of, at most £65. They are better runners, allegedly, but I'll find that out when I get myself one at the Folkestone MRC2011 Exhibition in October.

Friday, 2 September 2011

Routine Locomotive Maintenance

Running a model railroad is often just like the real thing. Many model railway enthusiasts will freely admit that getting the operations as close to reality as possible, with timetables, running orders, randomly occurring events, and so on, is all part of the attraction.

Just like real trains, model trains will eventually need some kind of maintenance, as will the tracks. Now, I'm not talking about major things here - such as switching to DCC, rerouting lines, or adding scenery - but about the little things.

Trains pick up dirt, often in places that are, at first, invisible. For example, a poster on the NewRailwayModellers forum pointed to an intermittent issue with a Bachmann Class08 not running smoothly, or indeed at all.

The suggestions (upheld) were that there was a build up of grime on the wiper pickups, which need to be cleaned routinely, by removing the wheels.

It's this kind of routine maintenance that can be made part of the operations by creating a works timetable to note when the last check was done of each loco, wagon and carriage, and what changes have been carried out. For those who already keep a logbook for each loco, this is just a natural extension of that.

For the rest of us, maybe it's about time we started to get real!

Thursday, 1 September 2011

Top Tip for Corrugated Surfaces

I was reading September's Model Rail and was particularly interested in an article about making corrugated iron sheets. Now, Paul A. Lunn suggests using a Modelscene corrugated panel as a kind of template, pressing a piece of thick aluminium foil (such as from a takeaway tray) down onto the panel so that it picks up the corrugated form.

The advantages are clear - weathering and distressing a piece of foil is way easier than doing the same on a piece of plastic, which is far removed from the kind of surface that is being modelled. For complete instructions, Model Rail is probably still available on the news stands, if not they might have a back issue service, and this particular tip is in Issue 160, September 2011.

Now, the reason that this interested me was that I don't have any Modelscene corrugated panels. However, what I do have are:
  • toothpicks
  • matchsticks
  • cardboard
The thought occurred to me that I could replicate the corrugated panels by gluing either toothpicks or matchsticks to the cardboard, and then pressing the foil between two of these makeshift panels. Other bits and pieces can also probably be used - toothpicks give a rounded edge, matchsticks a square one, but there are probably other possibilities to explore.

I look forward to seeing your efforts, and will be posting my own as I perfect the technique. A big thanks to Paul. A Lunn and the folks at Model Rail for the initial spark!

Tuesday, 9 August 2011

Aha! DCC Conversion for the Hornby Railroad 06 Class Diesel

Recently, those fine folks at Hornby released a Railroad edition of the Class 06 Diesel Shunter for an extremely affordable £20. Now, even a newbie like myself understands that there's a certain disdain reserved, by some people, for the Railroad editions, but when you're just starting out, with limited funds, Metcalfe models, and Railroad stock are just sensible, value for money, options.

Being a Railroad, of course, it's missing DCC, and the DCC plug, has no lights, and being Hornby isn't compatible with my existing Kadee couplers. So, I've got three projects on the go, one of which is now complete - my non-DCC Class 06 Diesel now has a Hornby 4 function DCC chip installed.

For those keeping score - that's £31 spent so far, plus about 45 minutes of work (bracketed by an hours worth of head-scratching.) Before I explain the project, I'd also like to point out that I wouldn't have even bothered, were it not for the free DCC guide that came with August's Model Rail magazine. I'd have just bought an expensive, DCC shunter, and not bothered with the Engine Shed, Goods Shed, track, points, etc. etc. that I was able to buy with the difference...

I should also mention that I have two regrets : I didn't take photos, and I don't have a soldering iron. So, this is a solder-free, no photo project. If you're going to attempt it, I recommend both taking photos, and using solder!

Step 1 : dismantle the loco following the instructions that came with it. If you're reading this in 2015, and bought it second hand at a local fair, then look underneath, there are little clips that can be persuaded to release the body from the frame in two parts.

Step 2 : cut the wires that lead from somewhere udner the motor (from the rail pickups), to the motor itself. Now, I know that there are people out there who will strip it right back, take off the motor, de-solder the TV supression (two capacitors) etc.etc., but I just cut the black wires, folded them back, stripped about 5mm of insulation off,and twisted the ends.

Step 3 : cut the plug off the DCC chip. You don't need it, since there's no DCC socket. But, leave as much wire as you can, as it makes the next bit easier.

Step 4 : put the loco down in front of you, with the front facing. This is important, because, unless you want to reverse the function of forwards and backwards, you have to get the right wire on the right side of the motor.

Step 5 : identify the right and left motor wires from the DCC pin allocations given in the DCC instructions. In my case, it was grey (left) and orange (right).

Step 6 : do the same for the power connections (rails). In my case, these were red (left rail) and black (right rail).

Step 7 : solder the correct colored wires to the correct black wire ends created by the cutting process in step 2. In my case, I twisted them together, and insulated with tape. Following Hornby's own directions, I also taped the wires around the DCC chip, but you might like to leave that until after testing and programming the DCC decoder. So...

Step 8 : test and program the decoder on your programming rail, or on the main.

Step 9 : if it didn't work as planned, check the wiring. If it did, put everything back how you found it, with the addition of the DCC decoder sitting on top of the motor - there's space!

And that's about all there is to it. No doubt I made mistakes, and no doubt others can do it better, but for a newbie, I thought I'd done okay! Next time, photos, I promise...

The next Railroad Class 06 Diesel project is to get rid of those irritating toy-like couplers and put on nice, shiny, but somehow out of place Kadees instead. After all, they did win the Model Rail magazine August edition's Coupling Test (for best auto couplers.)

Other railway modeling magazines are available.

Wednesday, 13 July 2011

Setting up IguanaWorks IR with the Piko Digi-Fern

One of the key components of my DCC shelf switching (and eventual continuous layout, I've decided!) show-ready, modular railway layout is the possibility to not only control it 'live' but also using a computer.

This means, in my case, being able to schedule IR signals from a computer. I realise that there are other ways to do this, but this appeals to my inner geek, so it is the approach I have chosen, at least for now.

There's a bunch of things that you'll need if you want to play along on this journey:
  • an IR transceiver (I chose one from the IguanaWorks)
  • the LIRC or WinLIRC software (I have both, instructions here are for WinLIRC)
  • a DCC, IR controlled model railway (mine happens to be a Piko Digital)
The first thing to to is install the IR transceiver. The IguanaWorks kit comes with nothing; the drivers and software must be downloaded from their site. The Windows drivers come in a self-installing executable, which must be done before the transceiver is plugged into the USB port!

The key to using this specific piece of equipment is to remember to always start the daemon software, which communicates with the USB connected hardware.

Next up is to install WinLIRC - and that just requires unpacking the archive to the hard drive. There are several steps that could follow, but for now, the WinLIRC software can be roundly ignored, as the Piko Digi-Fern controller needs to be set up.

Luckily that's pretty easy :
  • start the IR daemon (found in the IguanaWorks install folder)
  • in a 'cmd' window (Start->Run, enter cmd and hit enter) locate the WinLIRC folder
  • type, without quotes, "IRRecord.exe -f -d IguanaPlugin.dll ..\piki-digi-fern.cfg"
Then, just follow the instructions, and five minutes later, a config file is created for the Piko Digi-Fern.

So, where does this leave me? Well, I can now communicate with the railroad, in theory, but I've got a sneaking suspicion that I need to either use the (Win)LIRC transmit application in a batch file, or write my own, fully functional, control center software package.

Watch this space - first I want to build the railway!

(I also have a LIRC file for fellow Piko Digi-Fern users to save you a bit of work!)