Wednesday, 29 February 2012

How Do I Convert Old Hornby Couplings to New Type

One question that comes up frequently in relation to Hornby trains is "how do I convert from 'old' Hornby couplings to 'new' types of coupling?"

To answer this question, it's important to cover a number of topics, and I've written at least two articles (linked to at the end of this post) relating to my own experiences.

So, let's round up the main points, and hopefully answer the question in hand!

Identifying Hornby Couplings

In my experience, there are several kinds of Hornby coupling. The first (and as appears on the 'Railroad' range) is known as the D-ring, or Lima D-Ring, coupling. It's a moulded coupling, and part of the chassis of the loco or wagon, shaped like a big D.

It's also commonly found on the Hornby Thomas the Tank range.

At the other end of the spectrum are the tension lock couplings which fit into little pockets on the bogies.

There may be other kinds in between - I don't have enough experience with Hornby locos or rolling stock to be sure!

In any case, they'll either be moulded to the chassis, or fitted to rotating pockets on the chassis, or possibly on the bogie itself. The rotating pockets conform to the NEM standard.

Adding New Couplings (NEM)

NEM couplings are the new standard - they're a standard height above the rail, and provide an easy way to change between regular tension lock couplings and specific types like Kadee automatic (un)couplings.

They have a little spring clip that keeps them in place, but which can be slipped out by pushing the ends together with a pair of pliers.

Here's a selection NEM couplings from Amazon that are available for fitting to any piece of rolling stock:


However, these are only useful if your loco, wagon, or carriage, has a NEM pocket. If not, then you'll need to fit one yourself. For HO/OO modelers with a bit of skill Amazon used to have a NEM adapter that will take any of the HO/OO couplings above, but is now seemingly only available from the Amazon.de site.

Feel free to try them both:



Aftermarket NEM Solutions

Here are a few example Symoba couplings from DCC Supplies. They consist of a plate and vertical bar, onto which the pocket itself can be pushed. Usually, the kit will come with a gauge to get the correct height - it's a standard after, all - and will need to be glued in place on the chassis.

The vertical bar will then rotate from side to side, allowing the pockets on the loco and wagon/carriage to remain aligned on turns.

In certain circumstances, the operation may require a change of bogie. It's important to get the right one for the class of loco, or other rolling stock. Here is a selection from the New Modellers Shop - they're all Hornby in this case, but digging around the site ought to throw up other makes, too.

As promised, here are the direct links to my own experiences, adding a Symoba NEM pocket to a Hornby Railroad shunter, and then returning it to D-ring goodness, using the NEM pocket to change from Kadee to a Hornby NEM-compatible D-ring coupling.
For those who really want to get their hands dirty,Fine Tuning and Maintaining 00 Gauge Models contains a lot of great advice for a variety of different modification tasks. 

(Disclaimer : The links to products above go to affiliate pages, where, if you buy something, I make a modest amount to put towards funding this great hobby!)

Monday, 16 January 2012

Brian Kirby Uncoupler Variations

Over the years, a fair amount has been written about the legendary Brian Kirby Uncoupler. For those who aren't familiar with it; it's a way of cheaply modifying the tension lock coupling found on Bachmann stock so that it can be uncoupled using a magnet.


Essentially, it revolves around gluing staples to the tails of the individual couplers so that they can be flicked up and down as the staple is attracted downwards, forcing up the tension lock.


(There are some links at the end of this piece to help you visualize that a bit better!)


However, there are a few things that can be done to improve this clever idea, and while it cannot be made to replicate the action of delayed decoupling products such as those from Kadee, they can be made to behave a bit more naturally.


Electro-Magnetic Variation


The first is easy - use an electromagnet that can be switched on and off to decouple the stock at will. This prevents mistakenly running over the magnet slowly, and decoupling the stock unintentionally.


The trouble with this is that you need an awful lot of electromagnets to have enough decoupling points to make it worthwhile...


Sliding Plate Variation


...unless you mount them on sliding plates. These can slide in one of two ways - up and down, rather than using an electromagnet, or forwards and backwards. For those familiar with wire-in-tube point changing, this idea won't be that novel.


The magnet is mounted on a plate which can then be slid backwards and forwards under the layout (or in a special groove cut into the baseboard) thereby allowing decoupling under multiple lines.


There are bound to be combinations of these that can be used together to make even more variations, but with these basic techniques, operators can finally wave goodbye to the 'big hand from the sky'!


Brian Kirby Uncoupler Links


The original 'Magnetic Uncoupling for Bachmann Couplings' post on the Model Rail Forum web site.


A YouTube Video of the Kirby Uncoupler in action.

Wednesday, 4 January 2012

Kudos to Auhagen - Missing HO 11 363 Fussgangerbrucke Piece Received!

Happy New Year to all my readers and fans.


I'm starting this year with a story that shows that customer service is alive and well in model railroading.


Last year I bought a model from my favorite maker - Auhagen. If you're not familiar with the Auhagen name, they're a quality manufacturer of HO/TT and N buildings and accessories for European railroad modelers.


The kit in question was from their Stako System range - a metal footbridge that will find itself a place on my industrial layout. It's easy to build, realistic, and can be painted and detailed to look really authentic.


So far, so good. I opened the box and started building, without checking the contents beyond a visual estimation that everything 'looked' to be present. Sadly, I got near the end, and realized that there was a flight of steps missing.


The handrails were there, the supports, and everything else, but the actual steps seemed not to be.


So, I emailed Auhagen, explained the situation, and asked if they could forward the two missing pieces. After a bit of back and forth with the excellent customer service representative, and provision of a photo (not a scan, but a photo!) of the instructions, they offered to send them to me for free.


Two days later, and at their busiest time of year, the parts arrived, and I now have a top notch footbridge, which I'll photo in situ once it's installed on the layout.


Two things to take away from this feel-good story : one - check your bits, before you build, and two never be afraid to deal with customer service if you feel they've fallen short. 


Yes, the contract is with the shop where you bought the kit, but any company worth their salt will help you out if you get stuck.


Thank you Auhagen, it's a great start to the 2012!

Monday, 5 December 2011

Model Railroad Uncoupler Magnet Placement

There are two ways to achieve semi-automatic uncoupling. The first, as discussed in Delayed Action Tension Lock Uncoupling, allows for the locomotive to uncouple by simply changing direction, having passed over a magnet.


However, converting to Kadee style couplings can be expensive, and is not without it's own issues - see Adding Symoba NEM Pockets & Kadee Couplings. 


The alternative is based on a variation of the Brian Kirby magnetic uncoupling solution. This is a cheap, do-it-yourself addition to couplings that use a plastic tension locking hook (rather than the metallic Hornby ones) and allows for 'instant' uncoupling when positioned over a magnet.


Uncoupler Magnet Placement


In both cases, the placement of a magnet under the layout (or at least embedded in the base board) causes the decoupling to occur. The placement of the magnet tends to be fairly permanent, and as such needs careful thought.


For example, when delayed uncoupling is used, a rake can be spotted on any one of a number of sidings, even after passing over sets of points. But, when using immediate uncoupling, a magnet is needed for each individual siding.


This is explained more fully in the Kadee Inglenook Magnet Placement Advice article.


Another important consideration is for those who are planning an oval layout : every time the train runs over the magnet, the uncoupling action will take place. Depending on the rest of the track plan, this may, or may not, matter.


As a matter of course, though, it is usual not to place magnets underneath ovals, and reserve them for terminus operations (fiddle yard, terminus station, goods yard, etc.)


When Placement Doesn't Matter


In the Variations article, for those who haven't read it, there is at least one solution to the above - use an electromagnet. These can be switched on and off at will, and as such are widely used for selective immediate automatic semi-magnetic decoupling.


A final thought - there's often no need to put modified coupling in place on each piece of rolling stock. Commonly, though, they'll be fitted to locos and brake vans, as well as the start and end wagons in longer rakes.


However you choose to implement it on your layout, magnetic uncoupling can open a whole model rail experience!

Friday, 2 December 2011

Inglenook Kadee Magnet Placement Advice

Many of us, especially those of us with a shelf switching layout, have an Inglenook. Kadee magnet auto-coupling/decoupling makes operating an Inglenook much easier (when it works) but is a real pain when it doesn't, or if the magnets are put in the wrong place.


First off, what exactly is an Inglenook? Figure 1 shows the basic layout (adapted, with many thanks, from the Model Railways Shunting Puzzle Web Site) and can be adapted to any scale, with a couple of points (switches) and 7 or so bits of track.


Figure 1: Basic Inglenook


The operating fun to be had with the Inglenook relies on being able to pull wagons off trains (rakes) which are parked on the ends of the Inglenook, and swapping them with others, in a kind of Towers of Hanoi style puzzle.


While decoupling using the paintbrush-with-a-loop-of-wire-on-the-end solution is all well and good, for the ultimate in operating action, many enthusiasts like to implement some kind of automatic decoupling solution. Kadee manufacture such a solution, using magnets and knuckle couplers to provide a reliable shunting experience.


Due to the way that they work, on an Inglebook, Kadee magnet based auto-decouplers  are a great solution for one simple reason : delayed decoupling. For layouts using electromagnetic decoupling (in my opinion, the next best thing to Kadee's solution), magnets are needed at each place where a wagon (truck) can be uncoupled.


Wagons can be uncoupled  from other wagons, or from the loco (shunter), and Figure 2 shows where the placements should be (or could be) for an Inglenook using only electromagnetic automatic decoupling.


Figure 2: Inglenook Magnet Placement


There are other places that magnets might be appropriate or desirable, but Figure 2 serves to illustrate the point - 3 separate magnets, with three separate buttons, are required to be able to spot trucks (wagons) on each of the three sidings of the Inglenook. 


Kadee magnet based uncoupling changes this, as seen in Figure 3.


Figure 3: Inglenook Kadee Magnet Placement


The reason only a single magnet is required is that once decoupling has been activated the remaining rake (train, or wagon) can be shunted into place, and remains decoupled. When the loco pulls away, the decoupled wagon or rake is left in place - delayed decoupling.


There is a drawback, however. In order to decouple a relatively long rake, the track in front (to the left of) the magnet needs to be long enough to accommodate it. However, if this proves to be a problem, more magnets can be added on the sidings themselves, this allowing decoupling with some, or most, of the train over the points.